Oxygen-induced segregation during batch annealing of industrial steel coils
Loading...
Files
Date
2006-05
Authors
Wurth, Etienne
Journal Title
Journal ISSN
Volume Title
Publisher
University of the Free State
Abstract
The development of diffusion welds between spirals of steel coils, during batch annealing, is of particular interest because it preve nts the coils from being unwound for further use. The physical metallurgy of iron and steel is exceedingly complicated and many of the complications arise from the behaviour of solutes, which segregate to surfaces and interfaces, which alter the mechanical behaviour. Segregation studies were done by measuring the APPH’s (Auger Peak to Peak Heights) of the segregating species (P, S, C and Ti) against annealing time during the annealing of an ultra low carbon (ULC) Ti stabilized steel between 550 and 800oC. The modified Darken model was used to describe the complex segregation behaviour of the species involved during annealing of the industrial steel. This was done by comparing the initial changes in fractional surface concentration of the segregating species against annealing time to the trends in the surface concentration changes as describe by the Darken model for a ternary alloy. Calculations were done, using Langmuir-McClean equations, to determine the change in effective segregation energy as a function of oxygen surface coverage. Oxidation was allowed after sputtered cleaning and segregation, these oxidation results were compared with each other. No C segregation occurred without oxygen in the system. Oxygen induced-segregation of Ti and C occurred at 700oC and 800oC. Oxidation occurred at 700oC and 800oC. It was found that the adsorption of oxygen on the surface profoundly influence the segregation rate of the species involved. The modified Darken model was successfully used to describe the oxygen induced-segregation process. The induced segregation may act as a possible source of the diffusion welds during batch annealing.
Description
Keywords
Dissertation (M.Sc. (Physics))--University of the Free State, 2006, Annealing of metals, Steel -- Heat treatment, Steel -- Metallurgy -- Oxygen processes, Langmuir-McClean equation, Darken model, Segregation energy, Linear Least Squares (LLS), Industrial steel, Oxygen induced segregation, Diffusion, Oxidation, Auger Electron Spectroscopy (AES)